Герметик-прокладка анаэробный Permatex Gasket Maker, 50 мл. Артикул 51813
Герметик-прокладка анаэробный Permatex Gasket Maker, 50 мл. Артикул 51813
Характеристики
| Тип контейнера | Банка |
| Объем | 50 мл |
Аналогичные товары
Популярные товары в этой категории:
Описание
Кросс коды
- VAG - AMV18820003
Features
- Ideal for on-the-spot and emergency repairs, or when a conventional gasket is unavailable
- Fills gaps to .015"
- Cures to a solvent-resistant seal that will not tear or decay during service
- Parts disassemble easily even after extended service
- Old gasket material can be removed in minutes with a putty knife
Suggested Applications
For use on machined aluminum metal components; transmission pans, transmission case covers, transaxle casings, transfer cases, split crankcases, pumps, and housings.Instructions
TO MAKE A GASKET:
1. Clean both flange surfaces. Remove paint, dirt, grease or old gasket completely.
2. Spray Permatex Surface Prep® activator on one surface only. Allow to dry 1-2
minutes. 3. Apply a continuous bead of sealant to the unprimed surface. 4. Assemble
mating surfaces with minimal lateral movement. Excess sealant can be wiped away
with a cloth and shop solvent.
TO DRESS A GASKET:
1. Clean both flange surfaces. Remove paint, dirt, grease or old gasket completely.
2. Spray Permatex Surface Prep® activator to both flange surfaces. Allow to dry 1-2
minutes. 3. Completely cover both sides of the precut gasket with sealant. 4. Place
coated gasket on flange, and assemble mating surfaces with minimal lateral movement.