Герметик-прокладка анаэробный Permatex Flange Sealant, 50 мл. Артикул 51531
Герметик-прокладка анаэробный Permatex Flange Sealant, 50 мл. Артикул 51531
Характеристики
| Тип контейнера | Банка |
| Объем | 50 мл |
Аналогичные товары
Популярные товары в этой категории:
Описание
Features
- For use on rigid machined flanges with less than .015" gap
- OEM approved for use where anaerobic gasket is specified
- Eliminates preformed, pre-cut, paper, rubber and cork gaskets
- Flexes with flanges that move in service
- Withstands temperatures to 300°F (149°C)
Suggested Applications
Water pumps, thermostat housings, transmission pans, transmission case covers, engine cases, timing covers, and transaxle casings.Instructions
TO MAKE A GASKET: 1. Clean both flange surfaces. Remove paint, dirt, grease or old gasket completely. 2. Spray Permatex Surface Prep® activator on one surface only. Allow to dry 1-2 minutes. 3. Apply a continuous bead of sealant to the unprimed surface. 4. Assemble mating surfaces with minimal lateral movement. Excess sealant can be wiped away with a cloth. TO DRESS A GASKET: 1. Clean both flange surfaces. Remove paint, dirt, grease or old gasket completely. 2. Spray Permatex Surface Prep® activator onto both flange surfaces. Allow to dry 1-2 minutes. 3. Completely cover both sides of the pre-cut gasket with sealant. 4. Place coated gasket on flange and assemble mating surfaces with minimal lateral movement.